home
SAMSUNG appliance repair in Oakville

SAMSUNG appliance repair in Oakville

SAMSUNG appliances are considered to be among the most reliable, but even the most high-quality unit may break down suddenly, forcing you to find a reliable service center. If you have any problems with your device, do not worry – our certified technicians have experience in fixing all sorts of SAMSUNG appliances including refrigerators, washers, electric ranges, and others. Contact us and we will send you a licensed technician on the same day. Each service is covered by our warranty.

Only Samsung OEM Parts For All Repairs

We use OEM (Original Equipment Manufactured) Parts when repairing your appliance, and we have direct communication with Samsung to ensure the quick delivery of the necessary parts. Some parts are in stock, but the delivery of missing parts may take several days, so we will immediately inform you when they are available.

We are repairing

Washer

Dishwasher

Refrigerator

Dryer

Range & Cooktop

Microwave

Oven & Stove

Samsung Washing Machine Repair

A clogged filter or scale formation on a heating element can cause serious damage to your washer. All the problems will be quickly eliminated by skilled technicians from our repair service.

Samsung Dishwasher Repair

When you find signs that your dishwasher is malfunctioning, contact us and we will send you our certified technician, who will fix your unit in the shortest possible time.

Samsung Refrigerator Repair

If you are faced with a sudden breakdown of your refrigerator which requires urgent attention, contact us immediately and the technician will arrive on the same day.

Samsung Freezer Repair

If you notice that your freezer is malfunctioning, this is an important reason to contact our service. Our best technicians can deal with both old models and the newest devices of world-famous brands.

Samsung Dryer Repair

If your dryer is not heating or making loud noises, contact us and our qualified technicians will immediately come to your aid. We provide our customers with high quality and timely repair works.

Samsung Range Repair

Neglected symptoms of malfunction can lead to even bigger problems with your range. Contact our certified technician, who will quickly and efficiently eliminate any problem with your unit.

Samsung Cooktop Repair

We use our cooktops every day, but even this stable appliance can run into problems. If you need fast and quality repair of your unit, call our technician in Oakville.

Samsung Microwave Repair

The experience of our technicians proves that even the oldest models of microwaves can be fixed effectively, and they will work even better than some new units.

Samsung Oven Repair

Each oven malfunction can result in many consequences, which will lead to a more serious breakdown. Contact our service center to get your unit fixed as quickly as possible.

Samsung Stove Repair

Over time, the intensive exploitation of stove leads to malfunctions and breakdowns. Be sure that our qualified repairmen will bring your unit back to life in the shortest possible time.

Licensed & Insured

Same-Day Repair Service

Affordable Prices

Highly Skilled Technicians

Samsung Appliance Error Codes

Samsung Washer Error Codes:

Standard Washer (Front / Top Load)::

Error Code

Meaning

ND 5E / 5C

Error with Drain System. Water level not below water level sensor reset point (15 to 30 minutes after draining starts).

NF 4E / 4C

Error with Water Filling System. Filling time is over 15 minutes or no change to water level 3 to 5 minutes after water supply starts.

NF1 4E2 / 4C2

Water temperature not normal at initial time of water supply. Error with the water hose connection, thermistor or PCB.

LE1 1E / 1C

Error with Water Level Sensor. Sensor is out of range or there is loose wire connection on pressure switch or PCB terminal. When it happens, drain pump will be turned on automatically and stay on regardless of operating condition.

LE / LC / LC1

Error with Water Leaking. Water level below water level sensor signal reset point for 5 seconds or longer during Rince Cycle. When it happens, drain pump will be turned on automatically and stay on regardless of operating condition.

OE / OC

Error with OverFill. Water level is at or above the OverFill level. When it happens, water will be automatically drained until water falls below OverFill level.

dE / dC

Door is detected open while trying to be locked.

FL / dE1 / dC1

Error with Door Lock. Door fails to lock after 3 – 7 attempts.

Error with Door Lock. Door fails to lock after 3 attempts.

Error with Door Lock. Door open while the motor operating.

Error with Door Lock. Door open while trying to be locked.

ddC

Error with Add Door open/close switch on main PCB.

dC3

Error with Add Door lock switch on main PCB. Terminal or wire connection is broken.

dc / UE / Ub / Ur

Error with Load Balance or Hall Switch. Drum not balanced or cabinet bump detected during final spin. Extremely unbalanced load or Hall Sensor error which prevents the drum from spinning faster than 140 – 400 RPM.

Error with Hall Sensor. Hall Sensor signals received while motor is not operating.

3E* / 3C*

Motor won’t turn, no feedback signal from motor detected.

No feedback from Hall Sensor to MICOM. Motor Locked, defective Hall Sensor or PCB.

2E / 9E* / 9C*

Voltage for motor is higher or lower than specified limit. Error with Power Supply or PCB Power Control Bus.

E2 / bC2

Button is Jammed. Any button is held for over 12 seconds or jammed.

Error with Silver Care System. Silver Care Kit is running out, Silver Care PCB defective, main PCB defective or wire connection error.

Error with Vibration Sensor. Error with Motor Assy (For WF203 / BFW36 only).

8E / 8C

Error with MEMS Sensor. Abnormal output (Over 4.5V or under 0.5V) from sensor is maintained for 5 seconds or longer.

8E1 / 8C1

Error with Front MEMS Sensor. Abnormal output (Over 4.5V or under 0.5V) from sensor is maintained for 5 seconds or longer.

8E2 / 8C2

Error with Rear MEMS Sensor. Abnormal output (Over 4.5V or under 0.5V) from sensor is maintained for 5 seconds or longer.

HE / HC / HC*

Error with Heater. Abnormal water temperature. Heater is open or shorted.

tE / tC / tE1 / tC1

Error with Thermistor or PBA. No feedback from Thermistor to PCB for 5 seconds or longer.

tE4 / tC4

Temperature of the Intelligent Power Modules (IPM) of the PCB is abnormal or the Thermistor of the PCB is defective.

No Heater Relay operation when there should be. PCB relay error or abnormal Thermistor.

No System Relay operation when there should be. PCB relay error.

–

Error with PCB. EEPROM Fault.

AE / AC

Error with Communication between Main PCB and Sub PCB. Wire connectors loose, Main or Sub PCB defective.

AC2

The diagnosis of the I/O Board communication check.

AE3 / AC3

Error with Communication between DR Modem and Main PCB. Wire connectors loose, Main PCB or DR Modem defective.

AE4 / AC4

Error with Communication between WIFI PCB and Main PCB. Wire connectors loose, Main PCB or WIFI PCB defective.

AE5 / AC5

Error with Communication between LCD display and Main PCB. Wire connectors loose, Main PCB or LCD PCB defective.

AE6 / AC6

Error with Communication between Main PCB and PCB Inverter. Wire connectors loose, Main PCB or PCB Inverter defective.

SF / SF1/2/3

Error with System, replace Main PCB.

PE / PC

Error with Clutch Motor. No clutch position ready signal feedback to PCB 15 seconds after the clutch motor starts.

PE1 / PC1

Error with Clutch Motor Hall Sensor. Clutch Hall Sensor signal is abnormal after the clutch position is detected.

Power Failure during the Wash or Rinse Operation.

SUdS / Sd

Soap Foam (Suds) is detected during the Wash or Rinse Operation. Too much detergent used.

Flex Washer WV60M9900*:

Error Code

Meaning

1 5C / 5C

Error with Drain System. The water level not below the water level sensor reset point (15 to 30 minutes after draining starts). 1. Drain Pump or Hose blocked. 2. Connection loose on pump or PCB terminal. 3. Defective Drain pump or Main PCB.

1 4C / 4C

Error with Water Filling System. Filling time is over 15 minutes or no change to water level 3 to 5 minutes after water supply starts. 1. Water supply faucet is not on. 2. Water pressure hose blocked. 3. Connection loose on valve or PCB terminal. 4. Defective Water valve or Main PCB.

1 1C / 1C

Error with Water Level Sensor. 1. Water Level Sensor is out of range or defective. 2. Connection loose on pressure switch or PCB terminal. 3. Main PCB defective. When it happens, drain pump will be turned on automatically and will stay on regardless the operating condition.

1 LC1 / LC1

1 OC / OC

Error with OverFill. Water level is at or above the OverFill level. When it happens, water will be automatically drained until water falls below OverFill level. 1. Soap Foam (Suds) accumulation inside the water pressure hose. 2. Defective Water valve or Main PCB.

1 HC* / HC*

Error with Heater. Abnormal water temperature. 1. Heater is open or shorted. 2. Connection loose on heater or PCB terminal. 3. Defective Thermistor or Main PCB.

1 Ub / Ub

Error with Load Balance or Hall Sensor. 1. Drum not balanced or cabinet bump detected during final spin. Extremely unbalanced load. 2. Hall Sensor error which prevents drum from spinning. 3. Defective Main PCB.

1 3C* / 3C* / 3E*

Motor won’t turn, no feedback from motor detected. 1. Over current condition due to the over load. 2. Connection loose on Motor, Hall Sensor or inverter PCB terminal. 3. Defective Motor, Hall Sensor or inverter PCB.

1 9C* / 9C* / 9E*

Voltage for motor is higher or lower than specified limit. Abnormal power supply or PCB power control bus error.

1 8C / 8C

Error with MEMS Sensor. Abnormal output (Over 4.5V or under 0.5V) from sensor is maintained for 5 seconds or longer. 1. Connection loose on MEMS sensor or PCB terminal. 2. Defective MEMS sensor or Main PCB.

1 AC / AC

Error with Communication between Main PCB and Sub PCB, Loose wire connectors, Defective Main or Sub PCB.

1 tC / tC

Error with Thermistor. No feedback from Thermistor to PCB for 5 seconds or longer. 1. Thermistor is open or shorted. 2. Connection lose on heater or PCB terminal. 3. Defective Main PCB.

1 tC4 / tC4

Temperature of the inverter PCB is too high. 1. Thermistor of IPM is open or short. 2. Defective Main PCB for upper washer. 3. Defective Inverter PCB for lower washer.

1 dC / dC / dC1

Error with Door Lock. 1. Door is detected open while trying to be locked. 2. Door Lock defective or reed switch error. 3. Connection loose on door lock or PCB terminal. 4. Defective Main PCB.

1 dC4 / –

Dual Top Inner Door Open. 1. Top inner door is detected open while trying to be locked. 2. Connection loose on Door Lock or PCB terminal. 3. Defective Door Lock or Main PCB.

Error Codes for WA45M3100A*:

Error Code

Meaning

nd (small)

Error with Drain System. The water level not below the water level sensor reset point (15 minutes after draining starts).

nF (extra large)

Error with Water Filling System. Filling time is over 15 minutes or no change to water level 3 minutes after water supply starts.

nF1 (hot, small)

Water temperature not normal at initial time of water supply. Error with the water hose connection, thermistor or PBA.

1E (tap cold)

LE (large)

dc (hot, warm)

3E (hot, cold)

E2 (cold)

Button is Jammed. Any button is held for over 30 seconds or jammed.

tE (hot, medium)

Error with Thermistor. No feedback from Thermistor to PCB for 5 seconds or longer. 1. Thermistor is open or shorted. 2. Connection lose on heater or PCB terminal. 3. Defective Main PCB.

FL (hot)

Error with Door Lock. Lid open while the washer running.

LO (hot, extra high)

Error with Door Lock. Door fails to lock after 3 attempts. 1. Door Lock defective or reed switch error. 2. Connection loose on door lock or PCB terminal. 3. Defective Main PCB.

dL (hot, high)

Error with Door Lock. Door open while the motor operating.

8E1 (hot, cool)

Error with MEMS Sensor. 1. Connection loose on MEMS sensor or PCB terminal. 2. Defective MEMS sensor or Main PCB.

AE (warm)

Error with Communication between Main PCB and Sub PCB, Loose wire connectors, Defective Main or Sub PCB.

Error Codes for WA40J3000*:

Error Code

Meaning

nd (low)

Error with Drain System. The water level not below the water level sensor reset point (15 minutes after draining starts).

nF (extra high)

Error with Water Filling System. Filling time is over 15 minutes or no change to water level 3 minutes after water supply starts.

nF1 (hot, low)

Water temperature not normal at initial time of water supply. Error with the water hose connection, thermistor or PBA.

1E (cool)

LE (high)

dc (hot, warm)

3E (hot, eco warm)

E2 (eco warm)

Button is Jammed. Any button is held for over 30 seconds or jammed.

OE (mid)

Error with OverFill. Water level is at or above the OverFill level. When it happens, water will be automatically drained until water falls below OverFill level.

tE (hot, high)

Error with Thermistor. No feedback from Thermistor to PCB for 5 seconds or longer. 1. Thermistor is open or shorted. 2. Connection lose on heater or PCB terminal. 3. Defective Main PCB.

FL (hot)

Error with Door Lock. Lid open while the washer running.

LO (hot, extra large)

Error with Door Lock. Door fails to lock after 3 attempts. 1. Door Lock defective or reed switch error. 2. Connection loose on door lock or PCB terminal. 3. Defective Main PCB.

dL (hot, large)

Error with Door Lock. Door open while the motor operating.

8E1 (hot, large)

Error with MEMS Sensor. 1. Connection loose on MEMS sensor or PCB terminal. 2. Defective MEMS sensor or Main PCB.

AE (warm)

Error with Communication between Main PCB and Sub PCB, Loose wire connectors, Defective Main or Sub PCB.

Error Codes for WF428/438/448, WF520 and WF457:

Error Code

Meaning

ERROR! No Draining. Error with Drain System. The water level not below the water level sensor reset point (15 minutes after draining starts).

ERROR! Low Water Pressure. Error with Water Filling System. Filling time is over 15 minutes or no change to water level 3 minutes after water supply starts.

nF1

ERROR! Water Temperature Control Problem. Water temperature not normal at initial time of water supply. Error with the water hose connection, thermistor or PBA.

ERROR! Water Leakage Problem. Error with Water Leaking. Water level below water level sensor signal reset point for 5 seconds or longer during Rince Cycle. When it happens, drain pump will be turned on automatically and stay on regardless of operating condition.

LE1

ERROR! Water Level Sensor Problem. Error with Water Level Sensor. Sensor is out of range or there is loose wire connection on pressure switch or PCB terminal. When it happens, drain pump will be turned on automatically and stay on regardless of operating condition.

ERROR! Water Supply Problem. Error with OverFill. Water level is at or above the OverFill level. When it happens, water will be automatically drained until water falls below OverFill level.

ERROR! Temperature Sensor Problem. Water temperature not normal. Error with thermistor or PBA.

ERROR! Unbalanced load. Error with Load Balance or Hall Switch. Drum not balanced or cabinet bump detected during final spin. Extremely unbalanced load or Hall Sensor error which prevents the drum from spinning faster than 140 – 400 RPM.

ERROR! The Motor is not working properly. Error with Hall Sensor.

ERROR! The Motor is not working properly. Motor won’t turn, no feedback from motor detected.

ERROR! The Motor is not working properly. No feedback from Hall Sensor to MICOM detected. Defective Hall Sensor or PCB.

ERROR! High/Low Voltage Detected. Voltage for motor is higher or lower than specified limit. Abnormal power supply or PCB power control bus error.

ERROR! A Button is either stuck or is being pressed continuously. Button is Jammed. Any button is held for over 30 seconds or jammed.

ERROR! Power Interruption. No heater relay operation. Defective PCB relay or thermistor.

ERROR! Water Temperature Control Problem. No system relay operation. Defective PCB relay.

ERROR! The Washer door would not lock. Error with Door Lock. Door fails to lock after 3 attempts.

ERROR! The Door will not unlock. Error with Door Lock. Door fails to unlock after 3 attempts.

ERROR! The Door was unlocked while the washer was running. Error with Door Lock. Door open while the motor operating.

ERROR! Door is open. Error with Door Lock. Door open while trying to be locked.

8E1

ERROR! Front MEMS Sensor Problem. Abnormal output (Over 4.5V or under 0.5V) from sensor is maintained for 5 seconds or longer.

8E2

ERROR! Rear MEMS Sensor Problem. Abnormal output (Over 4.5V or under 0.5V) from sensor is maintained for 5 seconds or longer.

ERROR! Electronic Control Problem. Error with Communication between Main PCB and Sub PCB, Loose wire connectors, Defective Main or Sub PCB.

Power Failure during the Wash or Rinse Operation.

SUdS

ERROR! Excessive Suds. Soap Foam (Suds) is detected during the Wash or Rinse Operation. Too much detergent used.

Error Codes for WW22K6800AW:

Error Code

Meaning

Error with Drain System. The water level not below the water level sensor reset point (15 minutes after draining starts).

Error with Water Filling System. Filling time is over 15 minutes or no change to water level 3 minutes after water supply starts.

4C2

Water temperature not normal at initial time of water supply. Error with the water hose connection, thermistor or PCB.

Error with OverFill. Water level is at or above the OverFill level. When it happens, water will be automatically drained until water falls below OverFill level.

dC/dC1

Error with Door Lock. Door fails to lock after 3 attempts.

Error with MEMS Sensor. Abnormal output (Over 4.5V or under 0.5V) from sensor is maintained for 5 seconds or longer.

HC / HC*

Error with Heater. Abnormal water temperature. Heater is open or shorted.

tC / tC*

Error with Thermistor or PBA. No feedback from Thermistor to PCB for 5 seconds or longer.

Hr / Sr

No heater relay operation. Defective PCB relay or thermistor.

Error with Hall Sensor.

3E*(3E/3E1/3E2/3E3/3E8) / 3C*

Motor won’t turn, no feedback signal from motor detected.

9C*(2E/9E1/9E2)

Voltage for motor is higher or lower than specified limit. Abnormal power supply or PCB power control bus error.

bC2

Button is Jammed. Any button is held for over 30 seconds or jammed.

SUd

Soap Foam (Suds) is detected during the Wash or Rinse Operation. Too much detergent used.

Error with Communication between Main PCB and Sub PCB, Loose wire connectors, Defective Main or Sub PCB.

AC3

Error with Communication between Main PCB and DR Modem, Loose wire connectors, Defective Main PCB or DR Modem.

AC4

Error with Communication between Main PCB and WIFI PCB, Loose wire connectors, Defective Main or WIFI PCB.

AC5

Error with Communication between Main PCB and LCD display, Loose wire connectors, Defective Main PCB or LCD display.

AC6

Error with Communication between Main PCB and PCB Inverter, Loose wire connectors, Defective Main PCB or PCB Invertor.

SF*

Error with System. Defective Main PCB.

Error Codes for WF-J1254 & WF-B1254:

Error Code

Meaning

Error with Drain System. The water level not below the water level sensor reset point (10 minutes after draining starts).

Error with Water Filling System. Filling time is over 10 minutes or no change to water level 2 minutes after water supply starts.

Error with OverFill. Water level is at or above the OverFill level. When it happens, water will be automatically drained until water falls below OverFill level.

Water temperature not normal at initial time of water supply. Error with the water hose connection, thermistor or PCB.

Error with Door Lock.

Error with Water Leaking. Water level below water level sensor signal reset point for more than 4 times during Rince Cycle. When it happens, drain pump will be turned on automatically and stay on regardless of operating condition.

Error with Motor Tacho. Signals are less than 2 per 2 seconds.

Error with Motor TRIAC. Signals are less than 300 per 1 second.

Error with Thermistor. 0.2V and below or 4.5V and above is maintained for more than 3 seconds.

Error with Load Balance or Hall Switch. Extremely unbalanced load or Hall Sensor error.

Error Codes for P801, P1001 & B1113:

Error Code

Meaning

Error with Water Filling System. Filling time is over 10 minutes or no change to water level 2 minutes after water supply starts.

Error with Drain System. The water level not below the water level sensor reset point (10 minutes after draining starts).

Error with OverFill. Water level is at or above the OverFill level. When it happens, water will be automatically drained until water falls below OverFill level.

Error with Load Balance or Hall Switch. Extremely unbalanced load or Hall Sensor error.

Error with Heater. Abnormal water temperature. Changes more than 7°C in 1 minute or less than 2°C in 10 minutes.

Error with Thermistor or PCB. Water temperature not normal at initial time of water supply.

Error with Motor Tacho. Signals are less than 2 per 2 seconds.

Error with Motor TRIAC. Signals are less than 300 per 1 second.

Error with Thermistor. 0.2V and below or 4.5V and above is maintained for more than 3 seconds.

Error with Door Lock.

Samsung Dryer Error Codes:

Standard Dryer

Error Code

Meaning

tE / tC / tC2

Error with Thermistor. Abnormal resistance. 10KΩ at room temperature.

Error with Thermistor. Resistance too low or short circuit. 10KΩ at room temperature.

Error with Thermistor. Resistance too high or open circuit. 10KΩ at room temperature.

dO / dE / dC

Door is open. Close door and restart.

Error with Door Circuit. Defective Door Switch, Wire Terminals or PCB.

hE / hC

Error with Heater. Abnormal heating temperature. Defective Vent or Thermistor Resistance.

bE / bE2 / bC2

Button is Jammed. Any button is held for over 75 seconds or jammed.

Over Dried. Drying time is longer than 240 minutes. Defective Moisture Sensor Bars or PCB.

Et / EEE

Error with EEprom. Defective EEprom communication or PCB.

tE3 / tE5 / tC5

Error with Ventilation. Lint Screen is Clogged, Vent is Blocked or abnormal Thermistor Resistance.

2E / 9E1 / 9C1

Error with Power Supply. Voltage too high, too low or defective PCB.

FE / FC

Error with Power Frequency.

AE / AC

Error with Communication. Defective Main PCB or Wire Harness.

AE3

Error with Communication. Defective Main PCB or DR Modem.

AE4

Error with Communication. Defective Main PCB or WIFI PCB.

AE5

Error with Communication. Defective Main PCB or LCD PCB.

Contacts

(647) 484-8778

Oakville

info@appliancerepairoakville.com

Call